...

PCB arrived today.

Initial Setup

1. Soldered JP1,2,3 (debug LED, power , and charge indicator)

2. Set to ESP32 DevKit

3. Blink is working and printing to serial console on programmer UART

Initial TODO

•  Hello World!
•  Evaluate charger circuit
•  Add compiler directive for non-Heltec software build
•  ADC review for VBAT
•  ADC review for VSOLAR
•  Digital CHGST pin read
•  Rain gauge interrupt routine back online
•  I2C evaluation with BME280
•  Weather direction evaluation
•  Wind speed evaluation
•  New LoRa radio install for 915MHz
•  Calibrate ADC for VBAT
•  Calibrate ADC for VSOLAR
•  Verify I2C power switch
•  Verify LoRa power switch

...

Home Assistant - Hardware sensor/health data

...

05 Nov 2022

Mostly morning towards formal beta testing release on sender and receiver software at this point in time.