...
- James Hughes Meet with Cyril to go through settings/ fine tune
Build TODOs
- James Hughes Drill bottom plate to allow mounting holes for PDU and fine tune how this is mounted
- James Hughes Tie wrap ESCs and cables
...
Seemed like it did not work all the time. Pretty certain the transmitter is on first, before plugging in the battery to the drone
- ARM - Throttle down, rudder right
- DISARM - Throttle down, rudder left
Second Attempt of spin-up testing
...
- ESC gets really hot with just having the battery connected
- No motor
- No connection to controller
- I'll tear it apart later
Build notes
Always FULLY SECURE motor wires to the arms. They find a way to get into the props if not careful.