Barometer Calibration for Altitude
Use this link for altitude offsets. This setting will be available after v1.3.1
https://www.engineeringtoolbox.com/barometers-elevation-compensation-d_1812.html
| Code Block | ||
|---|---|---|
| ||
//===========================================
//BME280 altitude offsets (set by user)
//===========================================
#define ALTITUDE_OFFSET_IMPERIAL 5.58
#define ALTITUDE_OFFSET_METRIC 142.6 |
Rainfall Tip Gauge
1 tip = .011”/.2794mm of accumulation.
I2C addresses of sensors I have
These are my sensors and they work with the addresses in the Arduino code. I strongly recommend running a port scan to make sure your devices are responding in the same manner. Driver.begin() functions can usually be modified for alternate addresses from different vendors.
Accessory | I2C address | Comments |
|---|---|---|
UV - SI1145 | 0x60 | UV sensor |
Lux BME- BH1750 | 0x23 | light level sensor |
Barometer/ Relative Humidity - BME280 | 0x76 | |
EEPROM | 0x50 | Extended reliability for rainfall collection. Not as interesting now that we fail WiFi connect more gracefully in v1.3.1 (without tripping WDT) |
AS3935 - lightning detector | TODO - not evaluated |