Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Next »

PCB arrived today.

  1. Soldered JP1,2,3 (debug LED, power , and charge indicator)

  2. Set to ESP32 DevKit

  3. Blink is working and printing to serial console on programmer UART

  • Evaluate charger circuit
  • Gut Heltec LoRa code and convert from LoRa devkit
  • Rain gauge interrupt routine back online
  • I2C evaluation with BME280
  • Weather direction evaluation
  • Wind speed evaluation
  • New LoRa radio install for 915MHz

  • No labels