PCB Build
(Still waiting for J4 screw terminals to arrive - this is what connects back to the CMRI node)
...
Quick and dirty, but using the same current transformer that the NCE version uses (1:200 turn ratio)
Wiring
2 ea of 12 inch 18 ga wires
- Pad closest to diode get a fork terminal crimped at end
- Pad closest to PTC resistor gets a female connector for spade connection
Timeline
Boards shipped from pcbway today
PCBs arrived and bench testing is complete
1st 5 units are built and tested
Starting second group of 5
Demonstration
| View file | ||||
|---|---|---|---|---|
|
...