Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

Buck Converter

  • Built in rectifiers for AC to DC conversion. This takes 16VAC from the accessory bus and converts to 9VDC

  • Adjust the pot to 9VDC before attaching wires to the ITC

  • VO+ and VO- are labeled on the back of the PCB

ITC

This section talks about how to wire the ITC

Power

V+ and V- are the 9VDC from the buck converter.

  • Connect V+ to V+ on both boards and V- to V- on both boards.

Frog Power

Tortoise Wiring

Controls

LEDs (optional)

  • No labels