Open

Buck Converter

Open

• Built in rectifiers for AC to DC conversion. This takes 16VAC from the accessory bus and converts to 9VDC

• Adjust the pot to 9VDC before attaching wires to the ITC

• VO+ and VO- are labeled on the back of the PCB

ITC

This section talks about how to wire the ITC

Power

V+ and V- are the 9VDC from the buck converter.

• Connect V+ to V+ on both boards and V- to V- on both boards.

  • Located at leftmost 2 pins of the ITC 12 pin terminal block (see photo above)

Frog Power

Tortoise Wiring

Controls

LEDs (optional)