/
Heltec RX/TX units working

Heltec RX/TX units working

 

Sep 22, 2022

Heltec LoRaWAN dev boards are running as sender and receiver

Need to understand SPI pinout differences between dev board and weather station sender, so I can build for either platform

Sep 25, 2022

Determining how to reliably send a 64 byte non-ASCII data packet from the sender to the receiver. Right now packet receive is very spotty.

Edit: Seems to note like the 64 byte data structure, but 37 bytes send reliably.

Sep 28, 2022

45M Tx testing is reliable, going to box up the unit and place at end of property next.

Sep 29, 2022

Split weather sensor data and hardware data into separate structure. Data is sent on alternating WAKE events. The 915 MHz LoRa radio arrived to use with the PCB Debasish is sending.

Sep 30, 2022

143M range testing started at 6:50p and station is sending test packets every 15 sec. Looking good after 30 min.

Oct 1, 2022

Running for 9h with no signs of packet loss

Related content

LoRa Receiver
More like this
LoRa PCB sender checkout
LoRa PCB sender checkout
More like this
Initial program development notes
Initial program development notes
More like this
Weather Station
More like this
Weather Station v3 Home Software and Hardware evaluation
Weather Station v3 Home Software and Hardware evaluation
More like this
Devkit and weather station differences
Devkit and weather station differences
More like this